Customization: | Available |
---|---|
After-sales Service: | with After Sale Service |
Warranty: | One Year Guarantee |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
NF-60A | |||
Configuration Standard | Technical Parameters | Remarks | |
Whole Machine (L×W×H) |
1950×1000×1800mm | ||
Integrated Structure | Union mode | ||
Weight | (about)850Kg | ||
Machine case body | |||
Case Body Material | 304 | ||
Opening Mode of Safety Guard | Handle Door | ||
Safety Guard Material | Organic Glass | ||
Frame Below Platform | Stainless Steel | ||
Case Body Shape | Square-shape | ||
Power, Main Motor etc. | |||
Power Supply | 50Hz/380V 3P | ||
Main Motor | 1.1KW | ||
Hot Air Generator | 3KW | ||
Water Chiller | 1.9KW | ||
Jacket barrel heating power | 2 KW | Optional Additional cost |
|
Jacket barrel blending power | 0.18 KW | Optional Additional cost |
|
Production Capacity | |||
Operation Speed | 30-50/min/max | ||
Filling Range | Plastic/laminated tube 5-250ml | ||
Suitable Tube Length | Plastic/laminated tube 210mm | Pipe length more than 210mm should customize | |
Suitable Tube Diameter | Plastic/laminated tube 13-50mm | ||
Pressing Device | |||
Pressing Guiding Main Component | CHINA | ||
Pneumatic Control System | |||
Low Voltage Protection | CHINA | ||
Pneumatic Component | AIRTAC | TAIWAN | |
Working Pressure | 0.5-0.7MPa | ||
Compressed Air Consumption | 1.1m³/min | ||
Electrical Control System | |||
Control Mode | PLC+Touch Screen | ||
PLC | TAIDA | TAIWAN | |
Frequency inverter | TAIDA | TAIWAN | |
Touch Screen | WE!NVIEW | SHENZHEN | |
Coder | OMRON | JAPAN | |
Filling detect Photo electric cell | CHINA | Domestic | |
Total Power Switch etc. | ZHENGTA | Domestic | |
Color Code Sensor | JAPAN | ||
Hot Air Generator | LEISTER (Switzerland) | ||
Suitable Packing Material & Other Devices | |||
Suitable Packing Material | Aluminum-plastic composite tube and Plastic composite tube | ||
Obliquely Hanging Lining-up Tube Storehouse | Speed Adjustable | ||
Material contacting with filling material | 316L Stainless Steel | ||
Jacket layer hopper device | Temp. Setting according to material and filling demand | Additional cost | |
Jacket layer stirring device | In case of no material mixing, it remains fixed in hopper | Additional cost | |
Auto stamping device | Single side or double sides printing at the end of seal tube. | Double sides additional cost |